Check Valves BRASS PN16/20
Threaded Foot Valve with Strainer, Forged Brass, PN16/20
Threaded brass foot valve with strainer for PN16/20 small-pump suction service.
Quick Specifications
- Type
- Threaded brass foot valve with strainer
- Size
- DN15-DN50 (1/2-2 in)
- Material
- Forged brass body; brass or stainless steel strainer; NBR/EPDM seal
- Pressure
- PN16 / PN20
- Connection
- BSP or NPT threaded inlet
- Temperature
- 0 to 90 °C; confirm elastomer and water quality for final use
Product Details
A compact brass foot valve with threaded connection and integrated intake screen. It is used to maintain prime in smaller water-transfer or irrigation pumps while screening coarse debris from the suction line.
Specifications
| Parameter | Value |
|---|---|
| Model | FV-BRASS-TH-PN16/20 |
| Design Standard | Manufacturer threaded-valve design; applicable BSP/NPT thread standard |
| Size Range | DN15-DN50 (1/2-2 in) |
| Pressure Rating | PN16 / PN20 |
| Body Material | Forged brass body; brass or stainless steel strainer; NBR/EPDM seal |
| End Connection | BSP or NPT threaded inlet |
| Temperature Range | 0 to 90 °C; confirm elastomer and water quality for final use |
| Typical Application | Small pumps, domestic water, irrigation and light industrial suction systems |
| Operation | Automatic lift or poppet foot-valve operation with strainer |
| Inspection & Documentation | Hydrostatic shell and seat test; dimensional drawing, material certificate and certificate of conformity available on request |
FAQ
How should this valve be configured for the application?
Choose BSP or NPT thread, nominal size, seal material and screen arrangement for the pump duty. Final selection must be verified against the actual medium, pressure, temperature, flow direction and applicable piping standard.
Does this check or foot valve need an actuator?
No. Check and foot valves operate automatically from flow and differential pressure; select the correct cracking pressure, orientation and internal design for the service.
What documents can be supplied for a project order?
Material certificate, hydrostatic test record, dimensional drawing, packing list and certificate of conformity can be provided when specified in the order.
Do pressure and temperature ratings apply to every configuration?
No. Ratings depend on the selected body material, seat, trim, end connection and service fluid. Confirm the final pressure-temperature limit with the selected supplier before purchase.
Need This Product for Your Project?
Send us your required size, material, pressure rating, quantity or applicable standard, and our team will review your requirement.
