Ball Valves TANK BOTTOM
Manual Sanitary Tank Bottom Ball Valve, SS304/SS316L, Tri-Clamp / Welded
Sanitary SS304/SS316L tank-bottom ball valve for low-retention vessel outlet and drain duties.
Quick Specifications
- Type
- Sanitary tank-bottom ball valve
- Size
- DN10–DN100 (1/2–4 in)
- Material
- SS304 or SS316L wetted construction; PTFE/TFM seals
- Pressure
- 0–10 bar typical; higher ratings by configuration
- Connection
- Tri-clamp, threaded or welded tank outlet
- Temperature
- −20 to 150 °C (confirm seal material and CIP/SIP duty)
Product Details
A tank-bottom ball valve intended for hygienic vessel outlets where drainage and cleanability are important. The valve body and end connection are configured to match the tank nozzle, product medium and required cleaning regime.
Specifications
| Parameter | Value |
|---|---|
| Model | SAN-TB-304/316L |
| Design Standard | DIN / SMS / ISO / IDF / 3-A connection options |
| Size Range | DN10–DN100 (1/2–4 in) |
| Pressure Rating | 0–10 bar typical; higher ratings by configuration |
| Body Material | SS304 or SS316L wetted construction; PTFE/TFM seals |
| End Connection | Tri-clamp, threaded or welded tank outlet |
| Temperature Range | −20 to 150 °C (confirm seal material and CIP/SIP duty) |
| Typical Application | Tank outlet, vessel drain and hygienic process isolation |
| Operation | Manual handle; pneumatic actuation optional |
| Inspection & Documentation | Hydrostatic shell & seat test; dimensional drawing, material certificate and COC available on request |
FAQ
How should this valve be configured for the application?
Specify tank nozzle geometry, material grade, seal, surface finish and manual or pneumatic operation. Final selection must be verified against the actual medium, pressure, temperature and applicable piping standard.
Can this ball valve be automated?
Manual designs are available; pneumatic actuation is commonly selected for automated drain, CIP and vessel-transfer cycles.
What documents can be supplied for a project order?
Material certificate, hydrostatic test record, dimensional drawing, packing list and certificate of conformity can be provided when specified in the order.
Do pressure and temperature ratings apply to every configuration?
No. Ratings depend on the selected body material, seat, packing, end connection and service fluid. Confirm the final pressure-temperature limit with the selected supplier before purchase.
Need This Product for Your Project?
Send us your required size, material, pressure rating, quantity or applicable standard, and our team will review your requirement.
