How should this valve be configured for the application?

Confirm line orientation, thread standard, disc-seat construction and fluid cleanliness before purchase. Final selection must be verified against the actual medium, pressure, temperature, flow direction and applicable piping standard.

Does this check or foot valve need an actuator?

No. Check and foot valves operate automatically from flow and differential pressure; select the correct cracking pressure, orientation and internal design for the service.

What documents can be supplied for a project order?

Material certificate, hydrostatic test record, dimensional drawing, packing list and certificate of conformity can be provided when specified in the order.

Do pressure and temperature ratings apply to every configuration?

No. Ratings depend on the selected body material, seat, trim, end connection and service fluid. Confirm the final pressure-temperature limit with the selected supplier before purchase.

Zhengzhou, CN [email protected]

24/7 Support | EN / 中文

Threaded Stainless Steel Lift Check Valve, 1000 WOG

Industrial Valves & Actuators Check & Foot Valves

Check & Foot Valves

Threaded Stainless Steel Lift Check Valve, 1000 WOG

Threaded stainless steel lift check valve for 1000 WOG compact non-return service.

Quick Specifications

Type Threaded stainless steel lift check valve

Size 1/4-4 in (DN8-DN100)

Material CF8/CF8M stainless steel body and cap; stainless steel disc and seat trim

Pressure 1000 WOG at ambient temperature

Connection Female NPT, BSPT or BSPP threaded ends

Temperature -20 to 180 °C, depending on seat and selected seal

Request Quote Quick Inquiry on WhatsApp

Product Overview

A compact threaded lift check valve that opens when upstream differential pressure raises the disc and closes when pressure reverses. It is typically used in clean-fluid piping where the installation orientation follows the selected design.

Parameter	Value
Model	TLCV-SS-1000WOG
Design Standard	MSS SP-110 / ASME B16.34; API 598 test
Size Range	1/4-4 in (DN8-DN100)
Pressure Rating	1000 WOG at ambient temperature
Body Material	CF8/CF8M stainless steel body and cap; stainless steel disc and seat trim
End Connection	Female NPT, BSPT or BSPP threaded ends
Temperature Range	-20 to 180 °C, depending on seat and selected seal
Typical Application	Water, oil, gas and clean process utility piping
Operation	Automatic lift-disc non-return operation
Inspection & Documentation	Hydrostatic shell and seat test; dimensional drawing, material certificate and certificate of conformity available on request

Threaded Stainless Steel Lift Check Valve, 1000 WOG

Quick Specifications

Product Overview

Q: How should this valve be configured for the application?

Q: Does this check or foot valve need an actuator?

Q: What documents can be supplied for a project order?

Q: Do pressure and temperature ratings apply to every configuration?

Related Products

Bi-directional Seal PU-Lined Knife Gate Valve, DN50-700

Replaceable PU-Lined Bi-directional Seal Knife Gate Valve, DN50-300

Unidirectional Seal Knife Gate Valve for Slag Disposal, DN150-700

Bi-directional Seal Knife Gate Valve, DN50-1000, PN10