How should this valve be configured for the application?

Confirm flange drilling, resilient-seat material and installation orientation for the intended medium. Final selection must be verified against the actual medium, pressure, temperature, flow direction and applicable piping standard.

Does this check or foot valve need an actuator?

No. Check and foot valves operate automatically from flow and differential pressure; select the correct cracking pressure, orientation and internal design for the service.

What documents can be supplied for a project order?

Material certificate, hydrostatic test record, dimensional drawing, packing list and certificate of conformity can be provided when specified in the order.

Do pressure and temperature ratings apply to every configuration?

No. Ratings depend on the selected body material, seat, trim, end connection and service fluid. Confirm the final pressure-temperature limit with the selected supplier before purchase.

Zhengzhou, CN [email protected]

24/7 Support | EN / 中文

Flanged Swing Check Valve, Ductile Iron, PN10/16

Industrial Valves & Actuators Check & Foot Valves

Check & Foot Valves

Flanged Swing Check Valve, Ductile Iron, PN10/16

Ductile iron flanged swing check valve for PN10/16 water and utility pipelines.

Quick Specifications

Type Flanged swing check valve

Size DN50-DN600 (NPS 2-24)

Material Ductile iron body and cover; stainless steel hinge pin; EPDM or NBR seat option

Pressure PN10 / PN16

Connection EN 1092-2 flanged ends

Temperature -10 to 80 °C with resilient seat; confirm selected trim for higher temperature

Request Quote Quick Inquiry on WhatsApp

Product Overview

A conventional flanged swing check valve with a hinged disc that opens with forward flow and closes on reverse flow. It suits water and utility networks where full-bore flow and serviceable flanged installation are needed.

Parameter	Value
Model	SWCV-DI-PN10/16
Design Standard	EN 12334 / EN 1074-3; EN 12266-1 test
Size Range	DN50-DN600 (NPS 2-24)
Pressure Rating	PN10 / PN16
Body Material	Ductile iron body and cover; stainless steel hinge pin; EPDM or NBR seat option
End Connection	EN 1092-2 flanged ends
Temperature Range	-10 to 80 °C with resilient seat; confirm selected trim for higher temperature
Typical Application	Water distribution, HVAC, fire protection and general utility piping
Operation	Automatic swing-disc non-return operation
Inspection & Documentation	Hydrostatic shell and seat test; dimensional drawing, material certificate and certificate of conformity available on request

Flanged Swing Check Valve, Ductile Iron, PN10/16

Quick Specifications

Product Overview

Q: How should this valve be configured for the application?

Q: Does this check or foot valve need an actuator?

Q: What documents can be supplied for a project order?

Q: Do pressure and temperature ratings apply to every configuration?

Related Products

Unidirectional Seal Knife Gate Valve for Slag Disposal, DN150-700

Bi-directional Seal Knife Gate Valve, DN50-1000, PN10

Bi-directional Self-Sealing Knife Gate Valve, DN50-800, PN10

Unidirectional Seal Knife Gate Valve, DN50-1000, PN10