Butterfly Valves TRIPLE OFFSET METAL
Cast Steel Triple Offset Metal Seated Butterfly Valve, Class 150/300
Cast steel triple-offset metal-seated butterfly valve for Class 150/300 high-temperature shut-off.
Quick Specifications
- Type
- Triple-offset metal-seated butterfly valve
- Size
- NPS 2-24 (DN50-DN600)
- Material
- ASTM A216 WCB body; stainless steel disc; hardfaced metal laminated seat
- Pressure
- ASME Class 150 / 300
- Connection
- Wafer, lug or double-flanged ASME ends by configuration
- Temperature
- -29 to 400 °C, subject to selected trim and packing
Product Details
Triple-offset geometry eliminates rubbing during most of the operating cycle and enables a metal-to-metal sealing arrangement. Final suitability depends on seat hardfacing, packing and the specified leakage requirement.
Specifications
| Parameter | Value |
|---|---|
| Model | TOBFV-WCB-METAL-CL150/300 |
| Design Standard | API 609 Category B / ASME B16.34; API 598 test |
| Size Range | NPS 2-24 (DN50-DN600) |
| Pressure Rating | ASME Class 150 / 300 |
| Body Material | ASTM A216 WCB body; stainless steel disc; hardfaced metal laminated seat |
| End Connection | Wafer, lug or double-flanged ASME ends by configuration |
| Temperature Range | -29 to 400 °C, subject to selected trim and packing |
| Typical Application | Steam, hot oil, gas and high-temperature process isolation |
| Operation | Worm gear; pneumatic/electric actuation common |
| Inspection & Documentation | Hydrostatic shell and seat test; dimensional drawing, material certificate and certificate of conformity available on request |
FAQ
How should this valve be configured for the application?
Specify process temperature, leakage class, hardfacing, flange configuration and actuator fail position. Final selection must be verified against the actual medium, pressure, temperature, pressure drop and applicable piping standard.
Can this valve be automated?
Yes. Pneumatic or electric actuation can be specified when the mounting interface, operating torque, cycle time and fail position are defined.
What documents can be supplied for a project order?
Material certificate, hydrostatic test record, dimensional drawing, packing list and certificate of conformity can be provided when specified in the order.
Do pressure and temperature ratings apply to every configuration?
No. Ratings depend on the selected body material, trim, seat, packing, end connection and service fluid. Confirm the final pressure-temperature limit with the selected supplier before purchase.
Need This Product for Your Project?
Send us your required size, material, pressure rating, quantity or applicable standard, and our team will review your requirement.
